Main features:
Specially designed integrated pressurizing cylinder to ensure the stability and follow-up of pressurization and welding speed;
Multi channel forced water cooling system to ensure long-term operation reliability and prolong the service life of the equipment;
The upper and lower electrodes are pressurized with auxiliary stroke to improve the maximum service life of the electrode;
The speed of the pressurizing electrode can be adjusted arbitrarily to slow down the impact on the welded object and reduce the noise generated during welding;
The secondary conductive part adopts up-down insulation, which can avoid the short circuit accident of the insulating part when the iron pin is assisted or the welding workpiece is installed on the lower seat;
The transformer adopts low impedance design, and the secondary circuit adopts high-quality conductive materials to reduce internal friction, obtain small input and greater welding current;
The operation interface adopts nixie tube or liquid crystal display, which is clear, clear and intuitive;
The whole process of the equipment adopts vibrating disc and multi station rotary table to automatically feed, sort and combine for welding and automatic unloading, so as to realize full-automatic welding.
Main parameters:
Dn-150 special welding machine for tire nut
Main technical parameters
name parameter Company remarks
Rated power one hundred and fifty KVA
Rated voltage three hundred and eighty V
Secondary maximum short circuit current thirty-six KA
Load duration 20%
Cable cross-sectional area fifty mm ²
Welding transformer one hundred and fifty KVA
Feeding mode Indexing disc
Cooling mode water-cooling
Feeding mode Vibrating disk
Maximum welding speed sixty PCs. / min
Cooling water pressure zero point three Mpa
Cooling water flow four L/min
Cooling water temperature 0≤30 ℃
Air source pressure zero point six Mpa
